200pcs black carbon steel pwa m1 2 m1 4 m1 7 m2 m4 cross philips pan round head self tapping screw with washer zinc plated
Homesmiths G.I Flat Washer 12M
Homesmiths G.I Flat Washer 12M is forged using zinc-plated steel, which ensures long-lasting durability. These washers are used with a bolt or a screw to distribute the load evenly over a wide area. The washers prevent loosening due to the vibrations and stops screws from pulling through. They also act as spacers between the surface and the bolt. This 12M flat washer comes in a variety of finishes to suit a range of purposes. They are ideal for use with a 14 inch bolt or screw. .(1)Zinc plated steel built. (2) Durable and long lasting. (3) Used to spread load evenly. (4) Works with 14inch bolt or screw. (5)Variant: 12M.
0 Руб.
Homesmiths G.I Flat Washer 8mm
Homesmiths G.I Flat Washer 8M is one of the most essential fasteners to keep on hand. A flat washer is used with a screw or bolt to spread the load over a wide area. These washers are made from zinc-plated steel, which ensures durability. It also prevents loosening due to vibrations and the bolt or screw from pulling through. They can also act as spacers between the bolt and the surface. This 8m washer is available in a variety of finishes. .(1)Act as spacers. (2) Made from zinc plated steel. (3) Evenly spread load over a wide area. (4) Durable. (5)Variant: 8M.
0 Руб.
Cалазки Fujitsu 3.5 SATA SAS Tray Caddy для серверов Fujitsu A3C40152045 3.5 HDD Caddy Tray For Fujitsu RX2530 RX2540 M2 M3 M4 M5 TX1330 TX2550
Cалазки Fujitsu 3.5" SATA SAS Tray Caddy для серверов Fujitsu A3C40152045 3.5" HDD Caddy Tray For Fujitsu RX2530 RX2540 M2 M3 M4 M5 TX1330 TX2550 Совместимость: Fujitsu Primergy LFF 3.5″ hotplug tray frame is compatible withPrimergy RX1330 M1/ M2/ M3/Primergy RX2510 M1/ M4Primergy RX2530 M1/ M2/ M4Primergy RX2540 M1/ M2/ M4Primergy RX2560 M1/ M2Primergy RX100 S8Primergy TX1330 M2/ M3Primergy TX2550 M4/ M5 Primergy TX2560 M1/ M2
6400 Руб.
Болты SCREW M3 Phillips Длина 8mm Pan Head machine Silk 10штук
10 штук Болты креплений с круглой головкой SCREW Размер M3 Phillips Длина 8mm Никель покрытие из углеродистой стали Винтового Типа: Tamper-resistant ScrewsНазвание: перекрестная круглая головка винта (Pan Head machine Silk)Материал: углеродистая стальОбработка поверхности: никелевое покрытиеM3 phillips round head screw Nickel plating carbon steel Pan head machine teeth A7F558-14mm
200 Руб.
Болты SCREW M3 Phillips Длина 6mm Pan Head machine Silk 10штук
10 штук Болты креплений с круглой головкой SCREW Размер M3 Phillips Длина 6mm Никель покрытие из углеродистой стали Винтового Типа: Tamper-resistant ScrewsНазвание: перекрестная круглая головка винта (Pan Head machine Silk)Материал: углеродистая стальОбработка поверхности: никелевое покрытиеM3 phillips round head screw Nickel plating carbon steel Pan head machine teeth A7F558-6mm
250 Руб.
Cалазки Fujitsu 2.5 A3C40179841 SATA SAS Tray Caddy для серверов FUJITSU A3C40166880 RX2520 RX2530 RX2540 M1 M2 M3 M4 M5
Cалазки Fujitsu 2.5" SATA SAS Tray Caddy для серверов Fujitsu A3C40166880 A3C40179841 A3C40159740 A3C40159739 2.5" HDD Caddy Tray For Fujitsu RX2530 RX2540 M2 M3 M4 M5 TX1330 TX2550 Совместимость: 2.5 HDD Caddy for FUJITSU A3C40166880 A3C40179841 A3C40159740 A3C40159739Fujitsu Primergy SFF 2.5″ hotplug tray frame is compatible withPrimergy RX1330 M1/ M2/ M3/Primergy RX2510 M1/ M4Primergy RX2530 M1/ M2/ M4Primergy RX2540 M1/ M2/ M4Primergy RX2560 M1/ M2 Primergy TX1330 M2/ M3Primergy TX2550 M4/ M5 Primergy TX2560 M1/ M2
6400 Руб.
Homesmiths Self Tapping Screw Pan Head 1 1\/4 X10mm
The Homesmiths Self Tapping Screw Pan Head 1 14"" x 10mm is a durable and versatile screw designed for a wide range of DIY and construction projects. Made from high-quality materials, this self-tapping screw is ideal for fastening and securing materials such as wood, metal, and plastic. With its 1 14"" length and 10mm diameter, this screw is suitable for various applications, from small home repairs to larger construction projects. The pan head design provides a smooth and flush finish, making it a practical choice for visible fastening needs. The screw features a sharp, pointed tip that allows for easy installation without the need for pre-drilling. Its sturdy construction ensures a secure and long-lasting hold, making it a reliable option for all your fastening needs.
0 Руб.
Homesmiths Chipboard Screw Zp 5.0 X 25mm
Homesmiths Chipboard Screw ZP 5.0 X 25 is a self-tapping screw, which comes with a sharp pointy end that penetrates the wood effortlessly. The screw features deep and sharp threads, which prevents the screw from coming out. While installation, this screw avoids any spitting and cracking. Since it is a self-tapping screw, you do not need to make any pre-drilled holes. This helps prevent any accidental holes on the surface. Made using steel, these screws have high tensile strength. .(1)Made of steel.(2)Features sharp and deep threads.(3)Have a sharp point end.(4)High tensile strength.(5)Dimensions: 5 x 25.
0 Руб.
50шт. Болты m3x5mm креплений для материнских плат в корпус ПК. Стандартный компьютерный винт дюймовая резьба с шайбой головкой от PC-1
Computer Hard Drive Screw Болты винтики креплений для материнских плат 50штук Стоячный винт комплект 10шт. M3 (c метрической резьбой) олты креплений дюймовая резьба с шайбой головкой для крепления материнских плат в стоячный винт. Болты для крепления, DVD, FDD, материнской платыВинт M3 для всех дисков CD/DVD, ROM, дисководов, материнской платы и другого использования. Крепление винтики Screw для корпуса CASE ПК компьютера, PC, системного блока, сервера Cross Recessed Ytad ScrewВинты фасуются на вес погрешность +-10штРазмер винта: 5 мм (L) x 3 мм (диаметр) m3x5mmДиаметр головки: 7 ммMaterial: Carburizing Steel C1010 Zinc platedEach screw size: 5mm(L) x 3mm (diameter) M3x5mmHead diameter: 7mmM3 Screw M3X5 Computer Floppy DVD ROM Motherboard M3 screw for all CD / DVD, Floppy Drives, Motherboard and other use Head Screw Round Head With Shim Screw Bolts
990 Руб.
Homesmiths Chipboard Screw 3.5 X 20mm
Chipboard screws are different than wooden screws and shouldn't be confused. Particleboard screws, or more commonly known as Chipboard Screws are self-tapping screws which are suitable to be used on softer materials like wood. These screws are made from durable materials like stainless steel or carbon steel and are then galvanized to provide extra durability. With the Homesmiths Chipboard Screw 3.5 X 20mm, fastening chipboards will become very easy no matter what density they are. The size is ideal to accommodate medium thickness boards. .(1)Coarse threads and thin shafts (2)Makes it easier for the screw to pierce the chipboard.(3)Built from tough steel (4)Size 3.5 x 20mm.
0 Руб.
Кронштейн боковой Weaver (быстросъемный) АК, Вепрь, Сайга, Тигр, СКС (BH-MR51)
Быстросъемный боковой кронштейн BH-MR51 с планкой Weaver / Picatinny устанавливается сбоку оружия на крепление ласточкин хвост , используется для крепления и установки оптических, коллиматорных или ночных прицелов, лазерного целеуказателя, фонаря или любых других тактических приспособлений.Подходит для оружия, выполненного на базе автомата Калашникова (АК), карабинов Вепрь, карабинов типа Сайга 12, Сайга 20, Сайга 410, Сайга МК, Сайга 308, Тигр, СКС.
2590 Руб.
Разъем для ноутбука HY-TOOO5 Toshiba Tecra M1 M2 M5 A80 с кабелем
3.0mm Toshiba Satellite R10, R10-40, R10-60, R10-80, R15-S822, R15-S8222, R15-S829; Toshiba Tecra A80, M1, M2, M4, M4-100, M4-40, M4-60, M4-80, M4-SP645, M5;
660 Руб.
Разъем для ноутбука HY-LE021 Lenovo Thinkpad T30 T31 T32 с кабелем
3.0mmToshiba Satellite R10, R10-40, R10-60, R10-80, R15-S822, R15-S8222, R15-S829; Toshiba Tecra A80, M1, M2, M4, M4-100, M4-40, M4-60, M4-80, M4-SP645, M5;
577 Руб.
Разъем для ноутбука HY-LE022 Lenovo ThinkPad T410 T410i T430i T420i с кабелем
3.0mmToshiba Satellite R10, R10-40, R10-60, R10-80, R15-S822, R15-S8222, R15-S829; Toshiba Tecra A80, M1, M2, M4, M4-100, M4-40, M4-60, M4-80, M4-SP645, M5;
1056 Руб.
Набор винтов HSP 2x8 - 60087 (HSP60087)
HSP 60087 6 Ball Head Self Tapping Screw 2x8mm Саморез 2x8мм, 6 штук под крестовую отвертку.
655 Руб.
Terminator brand Screw Driver Set 4 Pieces 2 Pieces Slotted (-) & 2 Pcs Phillips (+)
The Terminator brand Screw Driver Set 4 Pieces, 2 Pieces Slotted (-) & 2 Pcs Phillips (+) is a perfect and handy tool set for your personal and professional use. It comes complete with the total 4 pieces of equipment including 2 pieces of slotted head (-) and 2 pieces of Philips (+) head. It is made of highly durable and hardened stainless steel material that won't be rusting and last for years to come. The handle of the screw driver is made of good quality and durable plastic material. .(1)Ideal for personal and professional use(2)Includes 2 pieces of slotted head (-)(3)Includes 2 pieces of Philips (+) head(4)Made of highly durable and hardened stainless steel material(5)Corrosion resistant so will last for years to come.
0 Руб.